The Remote Device or Resource Won’t Accept The Connection issue occurs many times when there is some problem in the configuration of the network settings. This error occurs mostly when the device is connected to a LAN connection. Therefore, whenever there is an error with the internet connection, people tend to run the Windows Network Troubleshoot. Even after troubleshooting, The Remote Device or Resource Won’t Accept The Connection error often persists.
The Reason behind The Remote Device or Resource Won’t Accept The Connection
The Remote Device or Resource Won’t Accept The Connection error is common and often occurs when people access the internet via any browser. Various reasons which lead to this error are mentioned below for better understanding and reference.
- Presence of an incorrect configuration in the network settings of the device.
- The proxy gate may have been enabled.
- The IE settings have been configured incorrectly.
The Solution
In this article, we have curated various methods to resolve The Remote Device or Resource Won’t Accept The Connection problem. The methods given in this article are very simple to follow and will be effective in getting rid of The Remote Device or Resource Won’t Accept The Connection Error. Without any further ado, let’s dive into the process of solving this problem.
FIX for The Remote Device or Resource Won’t Accept The Connection
Method 1: Switch Off Proxy Settings
If the proxy is wrong, some problems may occur with the internet connections. If the problem occurs due to the proxy setting, it can be taken care of by switching it off. The Proxy Setting can be switched on again. To check whether the problem is due to the proxy setting you can follow the steps given below:
- Select the Windows Key + R. This will open the Run command.
- Type the command “cpl”.
- Press the Enter button.
- The Internet Properties menu will now appear.
- Here, navigate to the Connections Tab.
- Select the LAN settings option.
- Press the OK button. Changes will be saved and applied.
- Restart the computer and check if the error has been taken care of.
If The Remote Device or Resource Won’t Accept The Connection problem still exists, you can give the next method a try.
Method 2: IP Address
The IP address sends the traffic from local networks to other networks. It acts as the address of the device. Sometimes the error may be due to the ineffectiveness of the IP address. This can be taken care of by resetting the gateway IP address. This can be done via a tool named Command Prompt. The procedure is given below:
- If you haven’t already reset the proxy settings, you need to do it again to proceed further.
- Navigate to the Windows Search Bar and type Command Prompt.
- Right-click the Command Prompt option.
- Select the Run as Administrator option.
- Now, type ipconfig/release in the command prompt bar.
- Press the Enter button.
- After the completion of the command, enter ipconfig/renew.
- After completion of both the commands, close the prompt.
Start the internet and check if the The Remote Device or Resource Won’t Accept The Connection error has been taken care of.
Method 3: Switch Off The Firewall Settings
The internet connections in the device are often protected by layers of the Windows Defender Firewall. The settings can be changed. These settings can be turned off to get rid of the problem. The steps to switch off the Antivirus and the Firewall Settings are as given below:
- Select the Windows Key + R. This will open the Run command.
- Go to the Control Panel in the run command.
- Press the Enter button.
- The Windows Firewall is present in the control panel menu.
- An option “Turn Windows Firewall On or Off” will be present on the left side.
- Press the option “Turn Off Windows Firewall” for Public as well as Private Networks.
- Save the changes.
Check if The Remote Device or Resource Won’t Accept The Connection issue persists after restarting the device. If the problem is still there, move on to the next method.
Method 4: Reset Browser
The error can be solved by resetting the browser to the factory settings. This error mostly occurs in the Edge browser. Before moving on to the procedure, keep a backup of the passwords, bookmarks, and accounts.
Google Chrome
- Three dots will be present at the top right corner.
- Clicking on it to open the menu.
- Then, select the Settings option.
- Now, select the option “Restore settings to the original defaults”.
Microsoft Edge
- In the Start Menu, select the Internet Options.
- Press the Advanced tab option.
- The Reset button is present in the bottom right corner. Click on it.
- Select the OK button.
- Restart the computer. Check if the problem persists. If it does, go for the next method.
Method 5: Run the Malware Scan
There may be the presence of some virus and malware on the desktop without the knowledge of the user. This may lead to the error occurring on the device. The problem lies in the fact that the malware is not easy to find.
If the Windows Defender is not able to find the malware, try out third-party software. Some of the best third-party software that you can use for this are Norton, Avast Security, Malwarebytes, etc. If indeed, there is the presence of malware in the system, delete it and check if the error persists.
Also read: Unique Methods to Resolve the Avast High Disk Usage Issue
In Conclusion
We have tried to list the most effective methods to solve The Remote Device or Resource Won’t Accept The Connection issue. If you have faced any problems or the methods were not helpful, please let us know in the comments section.
